I. Features :
• Kit include cup type hole saw with a mandrel bit for longer lock hole & a wood auger bit for latch hole.
• Precise boring for door is assured with four edged hole saw with an auger bit for pilot hole.
II. High Hardness :
This door lock installation kit is manufactured using TCT cemented carbide material with high hardness & hardening of the cutting.
III. High Torsional Forces :
The lock installation kit has a non-slip shank for easy gripping & higher torsional forces.
IV. Chip Hole Design :
This door lock installation kit has a clip hole design to facilitate chip removal for quick & easy installation of the door lock.
V. With Positioning Function :
The door lock installation kit come with positioning function an incisive tool for drilling holes for tongue.
VI. Versatile :
This door lock installation kit is ideal for installation ball type door lock in a variety of setting, including home, offices & other commercial properties.
How to installation :
Beside this kit you need an electric drill, screwdriver, chisel & hammer for the job.
I. Use the template in your lock kit to mark knob center & center of door edges. If no template is provided, mark centers, using dimensions shown in look fixing manuals.
II. For large lockset hole, use hole saw & drill halfway through the door using pilot drill in the center. Then finish drilling guide through from the other side of the dobr using pilot hole as a guide.
III. Drill latch hole ⅞” (22mm) past lockset using the wood anger bit.
IV. Mark around edge by inserting latch & chisel out marked area latch plate can be flush with dopris edge. Attach the latch. Insert outside knob with rodetteplate, putting the spindle through the latch or engaging lock tougue in the latch grooves. Insert the inside knob with rosetle plate. Align to outside knob & attach.
V. Set strike plate in plate.
There are no reviews yet.