I. Product Introduction :
This DCA AMR02-12 woodworking electric router is an electric tool suitable for wood carving, chamfering, trimming, grooving & curve shaping. It is suitable for as furniture manufacturing, cabinet installation, woodworking carving, etc. This product uses a powerful motor to provide an efficient & smooth cutting experience & is widely suitable for professional woodworkers & heavy DIY users.
II. How To Use :
1. Install the cutter head :
• Select the chuck of the required diameter & install it on the spindle & tighten the cutter head with a wrench.
• Check the extension length of the cutter head. It is recommended that it should not exceed 2 time the depth of the chuck.
2. Depth Adjustment :
Loosen the depth adjustment knob, adjust the base height & lock the cutter head after reaching the required cutting depth.
3. Power-On Preparation :
After ensuring everything is correct, plug in the power plug, hold the handle firmly with both handle & turn on the switch.
4. Cutting Operation :
Put the guide gauge close to the edge of the workpiece & push it in slowly ; be careful not to feed in the opposite direction to prevent rebound.
5. Stop & finish :
Turn off power switch & wait for the cutter head to completely stop before moving the machine away from the workpiece.
There are no reviews yet.